Month: October 2012

Fun with Piezo’s

I’ve created a simple beeping alarm with a Piezo transducer. Connect the Piezo + to pin 9, and the Piezo – to Gnd. Run the following sketch. Next version will be using the tone() command to build a Morse Code trainer. /* Piezo  This example shows how to run a Piezo Buzzer on pin 9 using the analogWrite() function.  It beeps 3 times fast at startup, waits a second then beeps continuously at a slower pace  */void setup() {   // declare pin 9 to be an output:  pinMode(9, OUTPUT);  beep(50);  beep(50);  beep(50);  delay(1000);} void loop() { …

Fun with Piezo’s Read More »